Whether you're in the heat of a race, or just sessioning your local trails, give yourself an advantage with Crank Brothers' Mallet DH pedals. They rock super easy-to-enter/exit 4-sided cages with wide aluminum platforms for serious support. Steel springs, steel wings and chromoly axles deliver DH-worthy durability that shrug off hard use and big hits. The open design quickly sheds mud for reliability in sloppy conditions and the eight adjustable traction pins per side grip well when you're riding clipped out in corners.
Get connected to your daily ride with MSW's MP-100 Dual-Sided Clipless Pedals. They feature dual-sided entry so clipping in quickly is a snap, and the adjustable spring tension lets you customize exactly how much force it takes to unclip. These no-nonsense pedals are stellar in all conditions, and when the going gets sloppy, the mud-shedding design ensures you can still get in and out of your pedals quickly and easily.
Sometimes you wear mountain bike shoes; sometimes you wear sneakers. MSW's CP-200 Platform and Clipless Pedals have you covered, whatever your footwear. These versatile pedals feature a wide, stable platform on one side and an SPD-style clipless entry on the other. Adjustable spring tension on the clipless side lets you customize how much pressure it takes to unclip, while sealed bearings keep you spinning smoothly for endless miles. And, the pedals are rebuildable to further maximize their lifespan.
Syzr Pedal Systems transfer power more efficiently to your off-road rig. Rider power is delivered to Syzr pedals directly through the cleats, not through the spongy rubber lugs of the shoe sole. Direct, Through-the-Cleat Power Transfer ensures that no rider energy is lost during transmission. SYZR pedals also use Active Cleat Stabilization Technology to improve the precision of the pedal/cleat connection and eliminate the slop and lateral instability common to off-road pedals. With advanced Roller-Cam Release Technology, Speedplay ensures consistent release in wet or muddy conditions. Instead of the usual metal-to-metal connection that allows other pedals and cleats to seize during release, Syzr cleats feature Ceramic Roller-Cams that do not seize when wet because they roll. In addition to improving consistency of release, the ceramic contacts provide exceptional, long-term durability.
A great grip, easily replaceable pins, and shaving a little weight off your bike are reasons why Black Label's Alloy Gas Pedals should be on your bicycle. They're made of light and tough aluminum with 9/16-inch chromoly axles so they're compatible with 3-piece cranks. These fine pedals feature loose ball bearings for durability and easy maintenance, too.
$184.99 - $199.00
Speedplay's Light Action Stainless pedals are the easiest Speedplays to get into, so they're the perfect solution for seasoned cyclists with delicate knees, and first-time clipless-pedal users alike. They provide 15-degrees of knee-saving float without the self-centering action inherent in most pedals, so you don't work against spring tension. Their compact and low-profile design positions your feet closer to the axles for maximum power transmission and excellent cornering clearance. They boast durable stainless-steel axles with needle and two cartridge bearings for smooth spinning and feature dual-sided entry and early release for super easy starts and stops.
- Great for safely carrying bikes on rear-mount car racks, preventing damage to car or other bikes - Pedals fold up vertically, providing for easier bike storage - All alloy platform, usable on both sides. Includes reflectors
The original game changer! SPANK Industries' SPIKE Pedals changed the world's concept of the benefits a flat pedal can offer and set the benchmark for top of the line value. The SPIKE Pedal's svelte 12mm thin forged alloy body not only maximizes pedaling clearance, but also grip and stability, by placing the rider's foot closer to the pedal axle. Equipped with forged hollow-tapered chromoly steel axles, SPIKE Pedals offer unmatched ultimate strength at just 420g per set. 20 steel pins in a virtual concavity configuration offer supreme grip without compromising platform thickness. Oversized industrial sealed bearings and IGUS bushings guarantee exceptional durability and performance. Often imitated, the SPIKE's CNC chamfered leading edges deflect impact forces and bring and instantly recognizable edgy aesthetic that always turns heads. - 12mm thin - Massive 100x100mm platform - ±420g/set (with full pin complement) - Cold forged, CNC optimized alloy pedal body - Cold forged chromoly steel axle - Chamfered leading edges for improved clearance and reduced impact forces - Chamfered side edges for improved cornering clearance - Oversized sealed full compliment inboard industrial bearing - Sealed outboard IGUS bushing - 20 adjustable pins per pedal - Full sized hex head pins improve durability and maintenance - Inboard friction seal prevents contamination and reduces unwanted pedal spin
SPANK Industries set out to make the perfect pedal for every rider, and the SPOON Pedals offer three platform width options for riders of any age or foot size. The SPOON 90 Pedals are the perfect solution for younger riders and many women who have compromised ideal support and grip with traditional size flat pedals. SPANK SPOON 100 Pedals are ideal for riders with average sized feet who want a flat pedal upgrade that won't break the bank. The extra wide pin pattern on SPANK's SPOON 110 Pedals spread load around the perimeter of large sized shoes, offering more predictable grip and enhanced support over traditional size flat pedals. Each SPOON pedal sports a 16mm-12mm concave profile lined with 20 steel pins, as well as a forged chromoly axle which delivers the strength and durability SPANK pedals are famous for. - SPOON 90 Pedals: US Men size 6 (Euro 39) and under; ±360g /set - SPOON 100 Pedals: Men sizes 7 to 10 (Euro 39-44); ±400g /set - SPOON 110 Pedals: US Men sizes 11 (Euro 44) and up; ±420g /set - Industrial grade axle assembly - Chamfered leading edges - MGR extruded, CNC optimized alloy body - 12-16mm concave platform profile - Cold forged chromoly steel axle - Industrial sealed bearing and IGUS bushing - 20 steel pins per pedal - Shot peen anodized finish with laser logos - Available in Black, Red, Blue, Green - Suitable for Kids, Race, Freeride, Trail
$95.00 - $99.99
VP's 69s are the perfect DH race, freeride, trail and BMX pedals. They are optimized for sticky shoes with 6 pins (VP's tallest and sharpest) per side on concave platforms that also grip your soles. These trick pedals boast extruded and CNC-machined aluminum bodies, tough chromoly axles and sealed bearings for long life. The bodies are built to withstand rock strikes without losing pins, too.
VP's Vice pedals are nice, flat pedals that perform and look great. They have large platforms and are low-profile reducing impacts with rocks and roots if you use them off-road (they're perfect for BMX and other bikes, too). They have 12 pins per side so they grip no matter what, and they feature extruded/CNC-machined aluminum bodies with heat-treated chromoly axles and sealed bearings for durability.
The world’s most successful downhill pedal is now available in a premium edition featuring titanium wings and dual-chamfered edges to minimize weight and maximize performance. The Crank Brothers Mallet DH 11 is designed and engineered for the rider who wants the best of the best, and nothing less. - Titanium wings for reduced weight - Dual chamfered edges to reduce rock-strikes - Exclusive double-anodized black and gold colorway - Concave platform for secure foothold - 8 adjustable pins per side for grip - Traction pad technology customizable interface - Ribbed body for better traction when unclipped - 57mm q-factor for stability at speed - 4-sided entry / superior mud shedding - Customizable float & release angle - Premium bearings & double seal system - Spindle material: forged SCM 435 chromoly steel - Body material: 6061-T6 aluminum - Wing material: 6AL/4v titanium - Spring material: 300 series stainless steel - Release angle 15° / 20° - Max rider weight no restriction - Q-factor 57mm - Inner bearing type: IGUS LL-glide bearing - Outer bearing type: Enduro cartridge bearing - Endcap hex alloy - Cleat: Premium brass cleats with shims included - Weight: 445 grams
$13.99 - $16.99
One of the most successful and popular pedals, and for good reason with its extremely simple, lightweight, inexpensive and famously durable plastic-bodied design. Often duplicated but never replicated. - High-strength plastic composite
Crank Brothers steps up to the plate to provide downhillers, freeriders and BMXers with one sweet platform pedal. Most flat pedals have the traction pins' hex holes on top, making them very difficult to remove if they break or are worn down. The 5050 3s have removable plates so you have full freedom to customize pin location for your preference and the terrain. Additionally, this puts the pin's hex-hole location on the back of the plates, making them easy to remove after heavy duty use. The 5050 3 pedals are crafted from 6061-aluminum with a chromoly spindle and utilize sealed needle and cartridge bearings for durability and low maintenance.
VP's Grind Pedals meet the needs of hard-core riders who want a slick and durable set of pedals, and they also work great for anyone who likes stable and comfortable platforms. The Grinds have versatile good looks and feature a thin profile, durable 1-piece nylon bodies with grip pins, boron-steel axles and oversize inboard bearings.
VP's R73 Carbon Road Pedals are their top-of-the-line Look-cleat compatible clipless road-bike pedal. They offer easy and secure entry/exit, a feathery weight and awesome power transfer. These fine pedals boast light and durable carbon bodies with stainless-steel reinforcements to reduce cleat wear; tough CNC-machined chromoly axles and super-high-quality sealed bearings for long life. You also get VP's ingenious Split Cleats that split into two with the use of a jigsaw-like keyed section making cleat replacement easy, fast and extremely accurate for anyone. The cleats have 7 degrees of lateral foot float and the pedals have adjustable release tension, too.
VP's VP-VXE Pedals are their entry-level SPD-cleat compatible mountain-biking clipless pedals. They feature durable and light cast-aluminum bodies, tough heat-treated chromoly axles and quality ball bearings for long life. They even have adjustable release tension.
VP's VX Pedals are solid all-around off-road performers designed as rugged and durable SPD-cleat compatible mountain-biking clipless pedals. They features light cast-aluminum bodies with forged, CNC-machined and heat-treated chromoly axles for strength and sealed cartridge bearings for long life. They also have adjustable release tension.
VP's VX Trail Race Pedals are their top-of-the-line trail-sized SPD-cleat compatible race clipless mountain-bike pedals. They provide stability and add the utmost in longevity and durability in all conditions by employing light and durable aluminum bodies; forged, heat-treated and CNC-machined chromoly axles for strength and full roller bearings with a very high quality inner oil seal for long life. This trick set of pedals is designed to truly go the distance and see you through as many epic rides and full-on hammerfests as you can handle. Entry and exit is crisp and predictable and the release tension is adjustable. The VX Trail Races are also fully user-serviceable.
VP's VX Trail Pedals are built for more stability and more shoe/pedal contact in an SPD-cleat compatible pedal. If you want value, durability and grip while still keeping the weight to a minimum, the VX Trails are your pedals. They boast lightweight aluminum bodies; heat-treated steel cleat jaws; forged, CNC-machined and heat-treated chromoly axles for strength and sealed bearings for long life. They have adjustable release tension, too.
- Weight: 312g - Body: CrMo Investment - Spindle: Cromoly - Bearings: 1 Cartridge/2DU - Springs: SWP - Cleat: XPEDO XPT (6° Float)
The Baldwin offers the best of both worlds, bridging the gap between the demands of XC racer to the enduro rider. It features the tried and true Posi-Lock retention system protected by a robust 6061 CNC body providing extra support. - Weight: 332g CrMo - Body: 60661 CNC AL - Spindle: Cromoly - Bearings: 3 Cartridge - Springs: SWP - Cleat: XPEDO XPT (6° Float)
Crankbrothers' most versatile pedal. The Candy excels at it all – cyclocross, XC, trail, all mountain. 4-sided entry enables superior mud shedding capability, and customizable float and release angles create a dialed-in feel. Spindle material: Forged scm 435 chromoly steel Body material: One piece composite Wing material: Stamped steel Spring material: 300 series stainless steel Release angle: 15° / 20° Q-factor: 52mm Inner bearing type: Igus LL-glide bearing Outer bearing type: Enduro cartridge bearing Cleat: Premium brass cleats with shims included Weight: 294g per pair Warranty: 5 years
• Sealed Bearings • Ability to use 6mm hex or 15mm pedal wrench • M4 threaded pedal cages mounting holes • Four windows in pedal body large enough to fit double toe straps • Polished Body • Concave footbed • Dual sided
• M4 threaded pedal cages mounting holes • Four windows in pedal body large enough to fit double toe straps • Polished Body • Concave footbed • Single-sided design
The Cecil Pro Track pedal was named for a Minnesota local legend who operated the Shakopee Velodrome in the 70’s and early 80’s. It's a traditional sealed-bearing, low-profile track pedal and was designed to accommodate single toe straps. - Pedal spindle: 9/16-inch - Pedal type: toe clip compatible - Spindle material: chromoly - Weight: 238 g - Cage length: 78mm - Cage width: 59mm - Height: 14mm, 26mm
A wide flat pedal with wicked grip, 45NRTH's Heiruspecs deliver supreme contact with the bottom of your traditional winter boots. The big CNC-extruded body provides a massive footprint and 16 alloy pins spread across the concave body to provide the ultimate grip. Sealed DU bearings keep them spinning smooth and replacement pin kits are available (sold separately) in seven different colors so you can color-coordinate your rig.
Make sure your pedals are rolling as smoothly as you are with MSW's MP-200 Pedals. They've got sealed bearings for stellar spinning, and they're serviceable so you can keep mashing for years and years. Spring tension is also adjustable, so you can control how much force it takes to unclip. And, mud shedding is a breeze thanks to the open design.
VP's Flat Pedals combine wide platforms and a great grip for excellent stability with extruded and CNC-machined aluminum bodies for light weight and a rainbow of colors for high style. You also get tough chromoly axles and sealed bearings for durability.
VP's Vex Pedals are incredible workhorses with sturdy, large platforms and a dual-concave design with pins for an awesome grip. They're also light making them ideal for mountain biking, freeriding, BMX and even city riding. They're built to last, too, with cast-aluminum bodies, tough forged, heat-treated and CNC-machined chromoly axles and quality sealed bearings.
Page 1 of 4 Next page